MaytRx
Specifications
MaytRx Unit A
- Weight 57 lbs.
- Depth 10"
- Width (right to left) 10"
- Width (left to right) 12"
MaytRx Unit B
- Weight 47 lbs.
- Depth 10"
- Width (right to left) 6"
- Width (left to right) 10"
MaytRx Unit X
- Weight 31 lbs.
- Depth 10"
- Width (right to left) 4"
- Width (left to right) 8"
MaytRx Unit Y
- Weight 47 lbs.
- Depth 10"
- Width (right to left) 8"
- Width (left to right) 10"
MaytRx Cap Unit
- Depth 11"
- Width 12"
- Thickness 3"
The MaytRx multi-use, multi-stone system is the prescription for retaining walls, stone fences, steps, columns and many other projects that display the character of natural stone installations.
The MaytRx system has five stones of different sizes and shapes. All five stones have two faces on each stone allowing projects to be built that require a finished look on both sides of walls, such as stone fences.
The MaytRx system offers strength, beauty and long life in a multi-stone, multi-use wall system that eliminates the fixed patterns of other multi-stone systems. Like the building blocks of our youth, the 5 MaytRx stones may be used randomly throughout any retaining wall, stone fence or other project. No pins are required to construct landscape walls and other projects. For all projects except engineered retaining walls, MaytRx uses a grooved alignment system that allows the installer to visually control the setback of each layer of stones. MaytRx can also be used to build engineered Segmental Retaining Walls (SRW's). MaytRx pins are used to align each layer's setback and secure the geogrid during the construction of engineered SRW's.
MATRYX BENEFITS
- Multi-stone system with no fixed or required pattern
- Two faces on all five stones
- Each stone is named, allowing directions to be followed – A, B, X, and Y plus the Cap stone
- Center split groove [front to back] on A, B, and Y stones for building corners, columns and wall-ends easily – no over ordering of corner units – color of corner units matches with the rest of the wall – the height of the corner unit matches with the rest of the wall
Two molds only – The A, B, X and Y in one mold, 2 cap stones in the other mold [On a 3 block machine these stones are 98% of full size] - Producer makes Split-face and Antique MaytRx stones
- Stones are flat, this allows easy construction of freestanding walls, steps and many other structures
- MaytRx's flat stones allow bump-out and Old English [staggered individual stones] walls to be built easily
Cap stone can be used as solider in a wall - Cap stone can be used horizontally in walls to stagger stone layers in a wall
- The A stone can be used as a solider in landscape retaining walls
- Pullout test and Shear test are available for engineered walls
- Pins are used in engineered SRWs for holding grid in place during construction of a wall and assurance of designed set back
- Pins are 6 ½ inches long, this assures they are in the groove below that determines set-back
- Pins are low cost
- Visual alignment on landscape retaining walls and freestanding walls [no pins needed] reduces cost
- Castle cap layer is exclusive to MaytRx system – replaces level cap layer
- Ledges for potted plants and garden nic-nacs can be built into MaytRx walls with the MaytRx Cap stones
20 inch square and larger columns - MaytRx stones, MaytRx Cap stones can be used to build 6” or 7” rise steps
- MaytRx stones are flat – there are no rear lips or set-back nubs that cut geogrid
- Geogrid placement tables are available
- Engineering drawings are available
